-The annual production capacity of the rolling mill is 465,000 ton/year of deformed steel bars.
-The feed billet is 130x130mm (125x125 mm) and 12m .The billets are heated to 1200 C°
approximately in a reheating furnace .
The hot billets are then rolled through horizontal / vertical 12 stands and a 8 stand High Speed
Block to produce deformed steel bars from sizes 8 to 32 mm.
-The products coming out of the last stand at nearly 900 C° are quenched in a special box
and then cut by the flying shear into 60 m long bars. After the cooling bed the bars are cut into
12m length and bundled to approximately 2 ton bundles.
-Bundles are inspected, properly tagged and sent to product delivery yards. Samples are
taken and sent to a Quality Control Lab, to inspect the finished product quality .
